Company: DiTEC Marine Products, LLC
W229 N2512 Duplainville Road, Waukesha, WI 53186 USA
Tel: 1-800-572-4390 | ditecmarineproducts.com
Product Use: Industrial | Emergency Phone: CHEMTREC (800) 424-9300 (Acct: 1018960)
H226 Flammable liquid and vapour
H304 May be fatal if swallowed and enters airways
H315 Causes skin irritation
H335 May cause respiratory irritation
H336 May cause drowsiness or dizziness
H340 May cause genetic defects
H350 May cause cancer
Flammable liquid 3
Skin corrosion/irritation 2
Germ cell mutagenicity 1B
Carcinogenicity 1B
Specific target organ toxicity (single exposure) 3
Aspiration hazard 1
DANGER
Use only outdoors or in a well-ventilated area. Wear protective gloves/clothing/eye protection. If swallowed: Immediately call a POISON CENTER or doctor. Do NOT induce vomiting. If on skin: Wash with plenty of soap and water. If inhaled: Remove victim to fresh air.
| Chemical Name / CAS No. | % Weight |
|---|---|
| Naphtha, petroleum, hydrotreated heavy (CAS 64742-48-9) | 90%–100% |
| Trade Secret | 1%–5% |
Inhalation: Rescuers should put on appropriate protective gear. Remove from area of exposure. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Keep victim warm. Get immediate medical attention.
Eye Contact: Immediately flush eyes with water for a minimum of 15 minutes, occasionally lifting and lowering upper lids. Get medical attention promptly.
Skin Contact: Remove contaminated clothing. Wash skin with soap and water. Get medical attention. Wash clothing separately and clean shoes before reuse.
Ingestion: Do NOT induce vomiting. Give victim a glass of water. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person.
Extinguishing Media: Carbon Dioxide, Dry Chemical, Foam, Water Fog.
Specific Hazards: Flammable liquid and vapor. Vapors/dust may cause flash fire or explosion. Vapors can travel to a source of ignition and flash back. Empty containers retain product residue and can be dangerous. DO NOT pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, or static electricity.
Special Protective Equipment: Wear self-contained breathing apparatus (MSHA/NIOSH approved) and full protective gear. Avoid solid water streams. Water runoff can cause environmental damage - dike and collect water used to fight fire.
Wear appropriate personal protective equipment and self-contained breathing apparatus. Eliminate all ignition sources. Do not touch or walk through spilled material. Avoid runoff into storm sewers and waterways. Ventilate spill area. Stay upwind. Absorb spill with inert material (e.g. dry sand or earth), place in chemical waste container.
Handling: Use only in a well ventilated area. Avoid breathing vapor, fumes or mist. Avoid contact with eyes, skin, and clothing. Take precautionary measures against static discharge. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment.
Storage: Store containers in a cool, dry, well ventilated place. Keep container closed when not in use.
Engineering Controls: Provide ventilation sufficient to maintain exposure below recommended limits.
Respiratory Protection: Program meeting OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator.
Skin Protection: Wear impervious protective gloves. Protective apron, suit, boots as needed.
Eye Protection: Wear safety glasses with side shields (or goggles) and a face shield.
Other: Facilities should be equipped with an eyewash facility and safety shower. Do not eat, drink, or smoke in areas where this material is used.
| Property | Value | Property | Value |
|---|---|---|---|
| Appearance | Clear White to Slightly Yellow Liquid | Odor | Not Available |
| Density | 0.762 | pH | Not Available |
| Flash Point | Not Available | Solubility | Not Available |
| Vapor Pressure | Not Available | Viscosity | Not Available |
| Specific Gravity | Not Available | Flammability | Not Available |
Chemical Stability: STABLE
Incompatible Materials: Avoid contact with moisture and/or water. Prevent contact with strong oxidizing agents.
Conditions to Avoid: Avoid impact, friction, heat, sparks, flame and sources of ignition.
Hazardous Decomposition Products: Toxic gases/fumes given off during burning or thermal decomposition. May release hydrogen fluoride under fire conditions. Carbon monoxide and carbon dioxide may form during combustion.
Hazardous Polymerization: Will not occur.
Routes of Entry: Inhalation, Ingestion, Skin contact, Eye contact.
Mixture Toxicity (Dermal LD50): 3,383 mg/kg
Component - Naphtha, petroleum, hydrotreated heavy (CAS 64742-48-9): Oral LD50: 5,000 mg/kg (Rat) | Dermal LD50: 3,160 mg/kg (Rabbit)
Naphtha, petroleum, hydrotreated heavy: 96 Hr LC50 Pimephales promelas: 2200 mg/L
Dispose of in accordance with local, state and federal regulations.
| DOT | IMDG | |
|---|---|---|
| UN/NA Code | UN1993 | UN1268 |
| Proper Shipping Name | Combustible liquid, n.o.s. (petroleum distillates) | Petroleum Distillates, n.o.s. |
| Hazard Class | 3 | 3 |
| Packing Group | III | III |
| Environmental Hazard | No | No |
| Hazard Label | Combustible Liquid | Flammable Liquid |
*Reclassified as combustible liquid per 49 CFR 173.120(b)(2). Not regulated for US ground shipments in nonbulk packaging (<119 gallons).
TSCA 8(b) Inventory: 64742-48-9 Naphtha, petroleum, hydrotreated heavy - All Components Listed.
SARA 313: This product contains EPCRA section 313 chemicals subject to reporting requirements of section 313 of the Emergency Planning and Community Right-To-Know-Act of 1986 (40 CFR 372).
Date Prepared: 04/03/2025 | Changes: Updates to section 14 to include marine transportation information (2025-04-03).
The information herein is believed to be correct but does not claim to be all inclusive and should be used only as a guide. Final determination of suitability of any material is the sole responsibility of the user. Always comply with federal, state and local regulations for handling and disposal.