Triton 2.0 is the ultimate protection for teak and other wood surfaces in the marine environment. It binds to the wood fibers and creates a protective, highly water and oil repellent surface. Triton 2.0 does not change the appearance, color or feel of the surface being treated.
It offers water and oil repellency and helps prevent the growth of mold, mildew, and algae. The one-step application significantly reduces surface maintenance.
Thoroughly clean the wood surface prior to applying Triton 2.0.
Use DiTEC Teak Clean. Allow the surface to completely dry before application.
Use DiTEC Teak Magic Part 1 & 2. Allow the surface to completely dry before application.
Protect yourself: Use gloves and goggles. Shake well before use.
Wood surface must be COOL TO THE TOUCH AND COMPLETELY DRY prior to application.
Small areas: Put Triton 2.0 in a bucket and apply with a soft sponge, brush or roller.
Large areas: Apply directly to surface with a soft sponge, brush, roller, or pump sprayer. For best results, use a pump sprayer then back roll onto the surface.
Initial application: Apply only two coats. Additional coats will not improve protection.
Dry time between coats: 40–60 minutes. Surface must remain dry for 12 hours after application. Fully cured after 24 hours.
Dispose of contents/container in accordance with local/regional/national/international regulations.
DANGER
Flammable liquid and vapor. May be fatal if swallowed and enters airways. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical, ventilating, lighting and equipment. Use only non-sparking tools. Take precautionary measures against static discharge.
Wear protective gloves and clothing and eye and face protection. If swallowed: Immediately call a poison center or physician. If on skin (or hair): Take off all contaminated clothing immediately. Rinse skin with water. Do not induce vomiting. In case of fire: Use appropriate method to extinguish. Store in a well-ventilated place. Keep cool. Store locked up.
Remove from area of exposure. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Keep victim warm. Get immediate medical attention.
Flush eyes with water for a minimum of 15 minutes, occasionally lifting and lowering upper lids. Get medical attention promptly.
Remove contaminated clothing. Wash skin with soap and water. Get medical attention. Wash clothing separately and clean shoes before reuse.
Do NOT induce vomiting. Give victim a glass of water. Call a physician or poison control center immediately.
DiTEC Marine Products, LLC
W229 N2512 Duplainville Rd., Waukesha, WI 53186 USA
Tel: 1-800-572-4390 | ditecmarineproducts.com